FLOODSAVER – Water Protection Systems for Washing Machines

posted in: Innovative Products | 0

Washing Machine leaks and floods are SERIOUS PROBLEMS that can have costly consequences. Get the best protection on the market today with a FloodSaver® water protection system!

Do it Right the First Time!

Washing Machine Surrounds

FloodSaver® Washing Machine Surround consists of two parts: a wall

The Better Water Protection System
The Better Water Protection System

unit and a base unit (either Regular or Drainless). The units are fitted
together on site. Nailing flanges are provided for attaching the unit to
studs, backing and subfloor. Sheetrock, flooring or trim is laid over
these flanges, as with any standard tub/shower enclosure. The unit is
plumbed with a standard shower drain. Water lines can enter at any
point, allowing for greater flexibility in rough-in plumbing; or a standard
plumber’s box can be installed in the unit for even greater simplicity.
Suitable for both new construction and remodels.

 

Specifications
FloodSaver Surrounds

 

FloodSaver 27″ Surround includes:
WMWP Wall panel and 27″ base
Suggested Specifications
Washing machine surround shall be FloodSaver® WMWP Wall panel and 27” base; 2-piece system to consist of formed high-density polyethylene base and wall panel. Base shall form a minimum 3” deep containment pan and shall accommodate a standard shower-type drain. The WMB27 base is available with a drain while the WMBD27 base is drainless. Wall panel shall provide minimum 3” spray barrier on sides and top.Please Measure Carefully!
Measure your appliance 3″ from the floor for the inside dimension. Measure the room space available for outside dimension to determine the correct pan size.Outflow Indent
Indent accommodates washers with bottom center hose outflows.

Attachment Flange
In new construction, the 5/8″ flange is nailed to sub-floor. Underlayment is installed over flange. In retrofit applications, the 5/8″ flange is fastened on top of finish flooring, then covered with trim. (NOTE: Trim is not included.)

Drain Hole
3.25” hole for shower drain on center; 16″ to wall to wall plate; 15.00” to outside base side. WMBD27 Drainless Base is used in applications where a floor joist or other obstruction requires flexibility in drain placement.

 

FLoodSaver Surround

 

FloodSaver 32″ Surround includes:
WMWP Wall panel and 32″ base
Suggested Specifications
Washing machine surround shall be FloodSaver® WMWP Wall panel and 32” base; 2-piece system to consist of formed high-density polyethylene base and wall panel. Base shall form a minimum 3” deep containment pan and shall accommodate a standard shower-type drain. The WMB32 base is available with a drain while the WMBD32 base is drainless. Wall panel shall provide minimum 3” spray barrier on sides and top.Outflow Indent
Indent accommodates new-style washers with bottom center hose outflows.Drain Hole
3.25” hole for shower drain on center; 16.25″ to wall on 32″ pan to wall plate; 15.00” to outside base side.

Attachment Flange
In new construction, the 5/8” flange is nailed to sub-floor. Underlayment is installed over flange. In retrofit applications, the 5/8” flange is fastened
on top of finish flooring, then covered with trim. (NOTE: Trim is not included in measurement.)

FloodSaver 32" Surround

http://www.floodsaver.com/surroundSpecs.html

Leave a Reply